for Plastics Middle Viscosity UV Glue 20gr

Product Description

About OkeBond^®

In new energy Automobile

Adhesive and automatic dispensing equipment field

OKEBond^® is your trusted professional partner

 

Light Curing UV Adhesive

Glass and Crystal Bonding UV Glue
OK-4300

UV Glue also named as Tracelss Boding Glue or Shadowless glue,

made from modified acrylate. It's a one component transparent material

that easily allows ultraviolet rays to penetrate, and the active factors in

the adhesive are activated by UV light of the sunshine or UV lamp and

then curing, packaged in a black sealed. plastic bottle, double cured

with light and moisture. The photoinitiator or photosensitizer in UV cured

materials absorbs ultraviolet light and produces reactive free radicals or

cations, triggering monomer polymerization and crosslinking chemical

reactions, causing the adhesive to transform from liquid to solid within

seconds

Prepolymers: epoxy acrylate, acrylic resin, etc

Initiating agent: benzophenone, etc

1. Fast Curing, high Bonding strength, high toughness, high impact

force, colorless and transparent adhesive layer after curing.

2. Easy bonding transparent objects or one-sided light-transmitting can

be bonded, like glass turntable, gladd tea table, crystal crafts, jewlry,

ornaments, lamps, glass, water tank etc.,

3. Widely used for the bonding of glass and metal, for the bonding and

seembly of glass furniture, handicrafts.

4. Non-whitening and no yellowing, aging resistance, high transparency

and non-toxic

5. Fast Curing, with higher strength, less than 5 seconds curing under

Sunlight or Ultra Violet Lamp.

1 Preparation before dispense glue

Clean the bonding surface, remove the dusty or oil, the water film on the

glass surface have to be removed with organic solvent)

2 Based on the area, determine the dispensing amount of glue and

start coating the adhesive, too much glue will be not helpful for

the bonding strenght and speed of curing, genereally one thin lower of

the adhesive would be best effects and efficiency.

3 Pressing slightly to make the adhesive layer evenly distributed and

discharge bubbles, and then irradiate the area of bonding with lamp

10~20s to cure, or just put it under the sunshine.
 

   

How the UV glue solve the Whitening problem? Transparent materials are easily penetrated by ultraviolet rays, and the active factors in the adhesive are activated by light and solidify. The fast curing of the adhesive will reduce the evaporation of glue,  thereby fundamen

What is the materials right for UV Glue? Metal + Glass, Glass + Glass, Crystal + Crystal, Glass + Crystal, etc., Asemble Line like 3C electronic products allow the light to cure the glue fastly, or one-sided transparent materials will be perfect to use this type of UV adhesive

 

  

 

Small Glue, Great Power!
Craftsmanship manufacturing, Building World-famous Brand